Super Safety Valve

Drill Stem Testing Tools Super Safety Valve

Super Safety Valve
Application: Drill Stem Testing

Overall length w/handing sub: 142.65"

Valve section length: 50.90"

Ram lock: 5.0" OD x 18.0" LONG

Valve body OD: 8.0"

Handing subOD: 8.16"

The Super Safety valve (SSV) is a master valve used for testing operations from jack-up or land rigs. The SSV is installed in the test string so that a BOP ram can be closed on the ram lock sub located in the top section of the valve. The annulus is then protected by the BOP rams, and the test string is protected by the safety valve. The Super Safety valve is capable of cutting wireline and 1.5-in. coiled tubing. If equipped with a cutter ball, it is capable of cutting 2-in. OD, .125-in. wall coiled tubing using a nitrogen dome charge or by applying balance line pressure

Features and Benefits

The Super Safety valve is controlled by two hydraulic lines and contains a chemical injection port for injecting chemicals at the valve body further downhole to an injection sub or to actuate a subsurface safety valve. The valve is held open by maintaining hydraulic pressure on the control line. The valve is designed to close by spring force but incorporates a nitrogen dome charge chamber to provide increased closing force and to lessen the time required for closing. This feature gives the valve the ability to cut wireline and coiled tubing without adding balance line pressure.

• Normally closed/fail-safe

• Maintains pump-through capabilities at all times

• Nitrogen dome charge for fast response

• Capable of cutting 1.5-in. coiled tubing, or if equipped with a cutter ball 2-in. OD, .125 in. wall thickness coiled tubing

• Small 8-in. OD fits inside 9 5/8-in casing

Specifications:
1. Halliburton type, all could change with Halliburton parts.
2. All equipments are produced according to API standard NACE MRO175-2002